1. First, Find a rapidshare download.
2. Hit the FREE BUTTON, like always.
3. While your waiting for it to countdown, change the URL in the bar to:
Code:
java script:c(countdown = 0);
and hit ENTER or the GO button over and over. Eachtime you do so, it decreases 10-20 seconds. Few times and the link appears.
or you can simply do the code below ONCE
java script: for (i=0; i<30; i++) { c(); }
Sunday, May 31, 2009
Rapidshare Hacked, unlimited upload, no countdown
UNLIMITED download/upload
Its very easy to fool Rapid Share server if your IP address is assigned by your ISP. Just follow these simple steps:
clean up IE or netscape or Firefox cookie( In this case the one that belong to rapidshare website)
On Command prompt (open MS-DOS)
type -----> ipconfig /flushdns <---Enter
type -----> ipconfig /release <---Enter
type -----> ipconfig /renew <---Enter
type -----> exit <--------Enter
Or save these commands in a bat file and run it everytime you need to fool Rapidshare server. Remember to clean up rapidshare cookie in your temp Internet files folder.
Now you should be ready to download/upload as many files as you want from their server.
another way, get proxies from the internet and apply to the browser.
some of proxies might not work though...
Note:
If you are on a LAN and behind a router (using NAT, for example)---this will not work.
If you use a fixed proxy--- this will not work.
If you have a fixed IP address from your ISP or college or employer or whatever -- this will not work.
If you happen to get the same IP address from your DHCP server because it's assigned to you -- this will not work
Its very easy to fool Rapid Share server if your IP address is assigned by your ISP. Just follow these simple steps:
clean up IE or netscape or Firefox cookie( In this case the one that belong to rapidshare website)
On Command prompt (open MS-DOS)
type -----> ipconfig /flushdns <---Enter
type -----> ipconfig /release <---Enter
type -----> ipconfig /renew <---Enter
type -----> exit <--------Enter
Or save these commands in a bat file and run it everytime you need to fool Rapidshare server. Remember to clean up rapidshare cookie in your temp Internet files folder.
Now you should be ready to download/upload as many files as you want from their server.
another way, get proxies from the internet and apply to the browser.
some of proxies might not work though...
Note:
If you are on a LAN and behind a router (using NAT, for example)---this will not work.
If you use a fixed proxy--- this will not work.
If you have a fixed IP address from your ISP or college or employer or whatever -- this will not work.
If you happen to get the same IP address from your DHCP server because it's assigned to you -- this will not work
Data recovery from corrupted hard drive
Ever had a hard drive get all corrupted by money and power? Or just overuse…
I found a good tutorial on how to recover your data from a corrupted hard drive, but it needed some tweaking so I moved some stuff around. This should be more efficient.
First things first, you need a new hard drive. It can be external if you want. But you HAVE to be able to mount it as a directory in DSL (damn small linux)
Now you need to borrow someone elses computer (cause yours is screwed right?).
Download DSL (damn small linux)
Just google “Damn Small Linux Download”, you’ll find it.
Got it? Good, now boot it.
after booting you will see the GUI of the DSL, run TERMINAL
and follow this command
*Note: this command will make you a super user in DSL
#sudo su
*Note: this command will mount you HDD on DSL
#mount /dev/hda1 /mnt/hda1
*Note: this command will check if your data is still on the HDD
#cd /mnt/hda1
#ls -al
Found any data? If not stop here and cry.
If yes move on.
Since you already have you new hard drive connected to your PC just run this command series.
#mount /dev/hdc1 /mnt/hdc1
#cd /mnt/hdc1
#mkdir backup
#cp -R /mnt/hda1/*.* /mnt/hdc1/backup
I found a good tutorial on how to recover your data from a corrupted hard drive, but it needed some tweaking so I moved some stuff around. This should be more efficient.
First things first, you need a new hard drive. It can be external if you want. But you HAVE to be able to mount it as a directory in DSL (damn small linux)
Now you need to borrow someone elses computer (cause yours is screwed right?).
Download DSL (damn small linux)
Just google “Damn Small Linux Download”, you’ll find it.
Got it? Good, now boot it.
after booting you will see the GUI of the DSL, run TERMINAL
and follow this command
*Note: this command will make you a super user in DSL
#sudo su
*Note: this command will mount you HDD on DSL
#mount /dev/hda1 /mnt/hda1
*Note: this command will check if your data is still on the HDD
#cd /mnt/hda1
#ls -al
Found any data? If not stop here and cry.
If yes move on.
Since you already have you new hard drive connected to your PC just run this command series.
#mount /dev/hdc1 /mnt/hdc1
#cd /mnt/hdc1
#mkdir backup
#cp -R /mnt/hda1/*.* /mnt/hdc1/backup
Boot winxp fast
1] Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2] From the Start menu, select "Run..." & type "gpedit.msc".
3] Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4] In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5] Click "OK", "Apply" & "OK" once again to exit.
6] From the Start menu, select "Run..." & type "devmgmt.msc".
7] Double click on "IDE ATA/ATAPI controllers"
8] Right click on "Primary IDE Channel" and select "Properties".
9] Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10] Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11] Reboot your computer.
2] From the Start menu, select "Run..." & type "gpedit.msc".
3] Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4] In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5] Click "OK", "Apply" & "OK" once again to exit.
6] From the Start menu, select "Run..." & type "devmgmt.msc".
7] Double click on "IDE ATA/ATAPI controllers"
8] Right click on "Primary IDE Channel" and select "Properties".
9] Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10] Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11] Reboot your computer.
How to set search for all files in winxp
When you perform a search for a file in Windows XP. The default setting is for XP to ONLY return files in the "Search Results" pane - when they are registered file types to a program on your PC.
In other words if you are looking for a file that is NOT registered with an application on your PC, it will not be found using the default search settings.
However, you can turn off the default by a quick Tweak of the registry!
Open the Registry editor (type regedit from the Run command) and navigate to:
HKEY LOCAL MACHINE\ SYSTEM\ CurrentControlSet\ Control\ContentIndex
Double-Click the value named:
FilterFilesWithUnknownExtensions
..and change the value from 0 to 1
Exit the registry editor and reboot!
In other words if you are looking for a file that is NOT registered with an application on your PC, it will not be found using the default search settings.
However, you can turn off the default by a quick Tweak of the registry!
Open the Registry editor (type regedit from the Run command) and navigate to:
HKEY LOCAL MACHINE\ SYSTEM\ CurrentControlSet\ Control\ContentIndex
Double-Click the value named:
FilterFilesWithUnknownExtensions
..and change the value from 0 to 1
Exit the registry editor and reboot!
Remove commwarrior MMS virus
Remove COMMWARRIOR MMS Virus manually To remove Commwarrior 1. Install a file manager on infected bluetooth enabled mobile phone device. 2. Configure the filemanager to show even system files. 3. Open \system\apps\commwarrior directory & delete the commwarrior.exe and commrec.mdl files. 4. Open \system\updates\commwarrior directory & delete the commwarrior.exe, commrec.mdl and commw.sis files. 5. Open \system\recogs directory & delete the commrec.mdl file 6. Sometimes the Infected device might have to be restarted before some of the above files can be deleted. 7. Switch off ur mobile phone and switch it back on. The infected device should now be clean and safe to use.
Subscribe to:
Posts (Atom)
